The Katz Eye™ focusing screen for the Fuji S5 Pro is a laser matte with a split prism circle and a microprism collar, very similar to the one you’d find in many classic SLRs. It is a direct replacement for the original, with no modifications required to the camera at all. The split prism with microprism ring is a great combination for focusing in a variety of situations. The screen will have NO effect on the functioning of the autofocus sensors of the camera and the on-demand grid lines will continue to function as intended.
Viewfinder Appearance
Fuji S5 Pro Viewfinder with Split Prism & Microprism Ring
The Katz Eye™ focusing screen for the Fuji S5 Pro has NO effect on existing viewfinder information. All viewfinder markings, including focusing points and on-demand gridlines will still function normally.
The Katz Eye™ focusing screen for the Fuji S5 Pro shows only a very minimal effect on light metering. In our testing, the Katz Eye™ screen tested within factory tolerance in nearly all situations. The only exception is when using spot metering mode with lenses having a maximum aperture slower than f3.5 (higher numerical f-stop). With lenses slower than f3.5, it is advisable to use either centerweighted average metering or matrix metering to preserve accurate meter response. In the event that spot metering mode must be used with a slow lens, it is advisable to set an appropriate exposure compensation by reading the histogram of a test shot.
The Katz Eye™ focusing screen for the Fuji S5 Pro is available exclusively in the Katz Eye™ “Plus” version . The “Plus” version has a unique prism design which delays the prism ‘blackout’ phenomenon until well after f11. Ordinary split prisms will black out by about f5.6, rendering them difficult to use with slower zoom lenses, teleconverters, or in extreme macro photography... but not the Katz Eye™ “Plus”. More information about the Katz Eye™ “Plus” can be found here.
The Katz Eye™ screen is a direct replacement for the original and no modifications to the camera are required. The installation requires no special tools or skills, but it does require working in tight spaces. If you are not confident in your vision or dexterity, professional installation might be advisable. For those users installing the screen themselves or for those taking the camera to a local shop, complete installation instructions, with plenty of photos, are available for download and the link will be included with your purchase. We will also include an installation tool to assist in the manipulation of the screen retaining wire, but the installer should still expect provide their own tweezers, gloves, lens tissue, and other common items.
If you do not wish to perform the installation yourself and you do not have a trusted local shop, we’d be happy to install your new focusing screen for you here at Katz Eye™ Optics. Please see the Installation Service page to order installation with your focusing screen. Installation service at Katz Eye™ Optics costs $65, plus the cost of return shipping of your camera.
The original Fuji S5 Pro screen is optimized for automatic focusing. As such, it is very bright, but it gives a very poor indication of DOF and has very little ‘snap’ (indication of when focus is achieved). The Katz Eye™ screen is optimized for manual focus applications and has a much improved matte surface. The matte surface on the Katz Eye™ screen is designed to give excellent DOF indication and a very sharp ‘snap’. However, because of this, the standard Katz Eye™ screen for the S5 is slightly darker than the original Fuji screen, particularly at smaller apertures. If viewfinder brightness is a concern for you, consider the optional OptiBrite enhancement. With the OpitBrite treatment, the brightness of the Katz Eye™ screen is comparable or slightly brighter than the standard Fuji screen. The OptiBrite treatment affects only the matte portion of the screen; it has no effect on the prisms and the OptiBrite treatment will have no significant effect on light metering in the S5. Click here for more information about the OptiBrite treatment.
Although the Fuji S5 Pro has very nice on-demand gridlines which remain functional with the Katz Eye™ focusing screen, additional patterns can be added to the focusing screen if you require a different grid pattern or crop lines. We can meet your needs with a variety of standard patterns or a custom pattern to your design. Please be aware that grid/crop line patterns added to the Katz Eye™ focusing screen will be permanent and will not turn off like the in-camera grid lines. Click here for more information about our grid/crop line options.
All Katz Eye™ focusing screens are custom made to order and are usually not available to ship the day the order is placed. As of 07/09/2008 production is backlogged due to very heavy order volume and most orders are being completed in approximately 2 weeks from the date the order is placed.
